Trailer Hitch Size:
1-1/4 Inch Hitch Opening
Towing Capacity:
200 Pound Tongue Weight
2000 Pound Towing
Trailer Wiring:
2008 Jeep Grand Cherokee Trailer Wiring
With tow package use 118381 for wiring
Recommended Ball Mount:
Features:
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.
Installation Notes:
No drilling required for installation
More Information >Trailer Hitch Size:
2 Inch Hitch Opening
Towing Capacity:
500 Pound Tongue Weight
5000 Pound Towing
Weight Distribution Towing Capacity:
550 Pound Tongue Weight
5500 Pound Towing
Trailer Wiring:
2008 Jeep Grand Cherokee Trailer Wiring
With tow package use 118381 for wiring
Features:
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.
Installation Notes:
No drilling required for installation
More Information >Trailer Hitch Size:
2 Inch Hitch Opening
Towing Capacity:
500 Pound Tongue Weight
5000 Pound Towing
Weight Distribution Towing Capacity:
550 Pound Tongue Weight
5500 Pound Towing
Trailer Wiring:
2008 Jeep Grand Cherokee Trailer Wiring
With tow package use 118381 for wiring
Features:
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Installation Notes:
No drilling required for installation
More Information >Trailer Hitch Size:
2 Inch Hitch Opening
Towing Capacity:
750 Pound Tongue Weight
5000 Pound Towing
Weight Distribution Towing Capacity:
750 Pound Tongue Weight
7500 Pound Towing
Trailer Wiring:
2008 Jeep Grand Cherokee Trailer Wiring
With tow package use 118381 for wiring
Features:
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
Installation Notes:
No drilling required for installation
Tech Tip:
Additional installation time required on models with OEM tow hooks.
More Information >Trailer Hitch Size:
1-1/4 Inch Hitch Opening
Towing Capacity:
300 Pound Tongue Weight
3500 Pound Towing
Trailer Wiring:
2008 Jeep Grand Cherokee Trailer Wiring
With tow package use 118381 for wiring
Recommended Ball Mount:
Features:
This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.
Installation Notes:
No drilling required for installation
Tech Tip:
Additional installation time required on models with OEM tow hooks.
More Information >Videos
for Trailer Hitch
Help Articles
for Trailer Hitch
Expert Answers
for Trailer Hitch
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for…
view full answer...I&…
view full answer...Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846.…
view full answer...If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly -…
view full answer...Normal operating temperatures for drum brakes range from 150-400 degrees F. During certain stopping conditions the brake heat can exceed 600 degrees. The effectiveness and stopping power of the brakes is significantly reduced at these higher…
view full answer...If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…
view full answer...The 7290 that you see is a casting number. It is found on AL-KO hubs that fit #99 spindles. I found that the bearings used are #28580 which would be the inner bearing and #25580 which would be the outer bearing. For the seal use #91030.
view full answer...The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the…
view full answer...A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…
view full answer...Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit…
view full answer...Filter Products (10)
Contact and Help
What our customers are saying:
Excellent Experience. Nice website. Easy to find the right hitch. Hitch came quickly. It was a perfect fit for our Toyota Matrix with Ground Effects.
Mike
Decatur, IL